Steps
Combi separator
Aerosol separator and knitted filter staged
Technische Merkmale
This aerosol separator has a high separation even with low air volume. It consists of two elements arranged one behind the other in a separable design with ergonomic quick-release fastener.
The front separator consists of a frame and staggered half-shells with a
The front separator consists of a frame and offset half-shells as well as a receptacle for the CNS filter element with knitted fabric filling behind it. The rear filter element can be pulled out. Drainage openings are located on the long sides.
Vorteile
This aerosol separator has a high separation even with low air volume. It consists of two elements arranged one behind the other in a separable design with ergonomic quick-release fastener.
The front separator consists of a frame and staggered half-shells with a
The front separator consists of a frame and offset half-shells as well as a receptacle for the CNS filter element with knitted fabric filling behind it. The rear filter element can be pulled out. Drainage openings are located on the long sides.
Einsatz
Combination separator for extraction hoods
- Separator thickness 35 mm tapering to 20 mm
and can therefore be used in any bonnet - Ideal for converting bonnets with 25 mm mounting rail
Funktion
- Combi separator for maximum self-cleaning effect and separation efficiency
- High flame penetration resistance and temperature resistance
Technologie Material
- Stainless steel /CNS 1.4301
- Tested and approved by TÜV-SÜD according to DIN EN 16282-6, type A
- Tested air volume 550 m³/h related to dimension 500 x 500 x 35 mm, complies with DIN EN 16282-8 (for UV systems)
Installation Wartung
- Receptacle in the bonnet min. 20 mm
Zusätzliche Infos
- Product testing in accordance with the Product Safety Act
- High separation even with low air volume
