Kitchen exhaust air is extremely grease and vapor containing and must therefore be cleaned with professional methods. oxytec offers a range of solutions that remove the grease from the air, achieve the required fire protection and above all reduce or almost completely neutralize the odor of the exhaust air. We also offer alternatives to the conventional exhaust air via roof and allow more freedom in the choice of location.
Cleaning pads
Fire protection
Avoid odor
Monument protection
Heat recovery
Free choice of location
Hygiene
Less maintenance
Fire safety
Front Cooking
Commercial kitchen, canteen
Snack
Front Cooking Systems
Recirculation systems
Ships
You want to run your kitchen in the way that is best for your guests and your business. But regulatory requirements and factual circumstances often stand in the way.
Almost always, this involves exhaust air issues: The greasy, smoky, steamy air needs to get outside without causing complaints from neighbors or starting fires.
The CKA air purification system consists of modules, i.e. different UV systems, which are selected and combined according to the respective requirements. The CKA modules, made of stainless steel, are sturdy, and can be installed directly into the fume hood or ventilation system near the source of the odor.
Features:
CKA IB/WB
Module for installation in the extractor hood or ventilation ceiling
CKA IB Kanal SS
Module as hood attachment (stainless steel)
CKA IB Kanal/ Channel DS LS
Module as channel installation
CKA plus KAT
at the end of the reaction section as a storage reactor
NT plasma technology was developed specifically for odor elimination and has proven itself in industry. It is based on a purely physical principle and works entirely without chemicals.
Plasma technology is particularly well suited to completely removing odors when the exhaust air is not too humid or greasy – and with very low connected loads and operating costs.
A plasma cleaning system works with four stages: Pre-filtration for grease removal, electrostat for pre-separation, reaction processes and oxidation in the plasma stage, activated carbon filter as storage reactor and final stage.
Activated carbon has so far been known as a pure filter solution – filters that have to be changed frequently. In oxytec systems they are used as an additional storage reactor as the last stage in the purification system.
After the exhaust air has already been largely freed from unwanted components, e.g. by the grease separator and a UV-ozone exhaust air purification, released ions and ozone can act longer thanks to the activated carbon catalyst. Residual molecules absorbed by the filter surface are still oxidized here. In the end, the original unpleasant odor has practically disappeared.
The scrubber CGA cleans the exhaust air especially from particles, soot and smoke generated by lava stone, coal and charcoal grills. It is based on the circulation of water, which is then mechanically filtered.
Properties
CGA
Scrubber for temperature and soot particle reduction
CGA plus CKA IB Kanal
Scrubber plus UV module as duct installation
CGA plus CKA IB Kanal plus KAT
Scrubber plus UV module at the end of the reaction section
Electrostates are separators that use ionization to deposit grease and smoke on their collector plates and thus effectively remove them from the exhaust air. At oxytec, they are combined in a compact unit with a UV cleaning unit.
A particular advantage of using the electrostate is the low pressure drop, which is why existing fans do not need to be reinforced when retrofitted.
Due to the modular design, electrostats can be used for smaller kitchens with lower exhaust air flows as well as for larger kitchens with air volume flows of e.g. 30,000 m3/h and more.
Features
Modul ES
Duct piece with electrostat
Modul ES/Carb
Duct piece with electrostat and activated carbon filter
Modul ES UV
Kanaleinbau mit Vorfilter- stufe, Elektrostat und CKA- Modul zur Geruchs-, Fett- und Blaurauchreduktion
Modul ES UV und Modul Carb
Duct installation with pre-filter stage electrostat, CKA module and activated carbon filter for almost complete reduction of odor, grease and blue smoke
CAP Cleanair Plasma ES+OV
Kitchen operation with steaming, boiling, frying, roasting
If the ventilation duct is provided by the customer or if a ventilation duct is planned, it is recommended to use the CKA modules, which require a reaction section.
CKA IB/WB
Module for installation in the extractor hood or ventilation ceiling
CKA IB Kanal SS
Module as hood attachment (stainless steel)
CKA IB Kanal/ Channel DS LS
Module as channel installation
CKA plus KAT
at the end of the reaction section as a storage reactor
For blue smoke and grease, the use of an electrostat is recommended.
Depending on customer requirements in combination with CKA and/or activated carbon.
Modul ES
Duct piece with electrostat
Modul ES/Carb
Kanalstück mit Elektrostat und Aktivkohlefilter
Modul ES UV
Duct installation with pre-filter stage, electrostat and CKA module for odor, grease and blue smoke reduction
Modul ES UV und Modul Carb
Duct installation with pre-filter stage electrostat, CKA module and activated carbon filter for almost complete reduction of odor, grease and blue smoke
CAP Cleanair Plasma ES+OV
If there is no duct between the hood and the fan, the required cleaning performance is carried out with a compact unit that fits the particular requirement.
ES Fan
eco Unit
eco Unit UV
CAP Cleanair Plasma
CAP Cleanair Plasma ES+
Holzkohlegrill, Lavasteingrill
Für die hohen Temperaturen beim Grillen, mit geringer Luftfeuchte, aufsteigender Asche und Kohlepratikeln empfehlen wir unseren Holzkohlewäscher CGA.
CGA
Scrubber for temperature and soot particle reduction
CGA plus CKA IB Kanal
Scrubber plus UV module as duct installation
CGA plus CKA IB Kanal plus KAT
Scrubber plus UV module at the end of the reaction section