Skip to main content

Replace thermal post-combustion:

There are alternatives that are more cost-effective, more flexible and
space-saving – and save 99 % CO₂ at the same time.

Replace thermal post-combustion:

There are alternatives that are more cost-effective, more flexible and
space-saving – and save 99 % CO₂ at the same time.

Clean air calls for clean solutions.

We tackle organic pollutants with clean technologies: UV ozone, plasma, electrostats, scrubbers and activated carbon are alternative technologies to thermal post-combustion with gas.

It all depends on the right sequence of process steps and the right dimensions for the load. With our 20 years of expertise in exhaust air purification, we can usually find the solution for a specific pollutant profile that will enable you to fulfil the TA Luft.

What would you like to know?

Simply put your question to our AI. They will answer you individually:

Our solutions are superior to TNV in several ways

  1. On/off operation: We don’t need a pre-run.
  2. We need 80% less energy than the TNV.
  3. Our systems require very little space and can therefore be installed close to production.
  4. The installation costs are low. Maintenance costs are also low.
  5. Our system saves 99% of CO₂ compared to TNV.

We offer a solution for most organic pollutant profiles.

When coating fabrics, furniture and technical components and in the chemical and pharmaceutical industries, the exhaust air is contaminated with solvents. Around 50 substances occur relatively frequently. Because they are mostly of organic origin, we are able to get them under control with our technologies.

We also have a lot of experience with the food industry. We remove greasy exhaust air, such as that produced during frying, baking and deep-frying, immediately after the cooking process that caused it. Because our systems are extremely space-saving, we install them close to the production facilities to prevent sooting of the exhaust air ducts.

This is not possible with a thermal post-combustion system due to its dimensions alone. The exhaust air ducts that lead there must then be cleaned regularly at great expense.

oxytec exhaust air purification systems are so light that they can also be placed directly above production on the roof.

The first step. Testing.

Because every company has its own processes, the pollutant profile, pollutant load, temperature and humidity of the exhaust air vary. We therefore always carry out tests with our test systems in advance.

This way, both sides know that the limit values can be complied with and which structure and dimensioning is required for this.

7 reasons to replace the TNV now

  1. Gas is expensive and the price of gas is difficult to calculate.
  2. A TNV consumes 30% of the energy alone to keep the flame stable.
  3. A TNV cannot simply be switched on and off as required.
  4. A TNV only removes part of the odour.
  5. A TNV requires an enormous amount of space.
  6. The technical effort required for heat recovery is considerable, with corresponding system costs.
  7. A TNV generates enormous amounts of CO₂.

What would you like to know?

Simply put your question to our AI. They will answer you individually:

Do you have any questions or
would like a quotation?

Please contact us: