MHL
Centre bonnet with air curtain system
Technische Merkmale
This efficient centre bonnet with integrated air curtain system optimises vapour capture.
Vorteile
This efficient centre bonnet with integrated air curtain system optimises vapour capture.
Einsatz
- For exhaust air in kitchens with high air volume
- Kitchen bonnets can be combined with technologies for air purification
Funktion
- The temperature-controlled supply air is fed into the supply air pressure chambers integrated longitudinally in the bonnet via a support steel system embedded in the lower edge of the bonnet, thus creating a hood-enclosing air curtain. The stabilised
stabilised volume flows have an energy-saving effect on the rinsing level.
Technologie Material
Bonnet body
- Stainless steel V2A Chrome-nickel steel material 1.4301
Surface fine ground, K240 brushed - Material thickness in the side panels 1.5 mm
- Grease collection trough welded all around grease and condensate tightness
with 3/8″ drain ball valves at deep-drawn discharge point
Separator - Efficiency separator, type A, made of staggered stainless steel half-shells
stainless steel half shells 1.430 - Separation efficiency depending on inflow velocity and particle size
and particle size up to 98
Dimensions: 500 x 400 x 25 mm; number adjusted to air volume
Lighting - Standard lights in LED, 1-lamp, protection class IP54
Flush-mounted in bonnet, with Sekurit glass cover
Installation Wartung
Zusätzliche Infos
- The tempered supply air should generally not exceed a value of
not exceed 80 – 100 m³/h per linear metre
