MHI
Centre bonnet with induction system
Technische Merkmale
This efficient wall bonnet with integrated supply air directly onto the separators optimises vapour collection.
Vorteile
This efficient wall bonnet with integrated supply air directly onto the separators optimises vapour collection.
Einsatz
- For exhaust air in kitchens with high air volume
- Kitchen bonnets can be combined with technologies for air purification
Funktion
- The supply air is fed via induction supply air nozzles through the integrated
into the bonnet via induction supply air nozzles through the integrated heat-insulated pressure chambers. The resulting stabilised volume flows have an energy-saving effect in the rinsing degree
Technologie Material
Bonnet body
- Stainless steel V2A Chrome-nickel steel material 1.4301
- Surface fine ground, K240 brushed
- Material thickness in the side panels 1.5 mm
- Grease collection trough welded all around grease and condensate tightness
with 3/8″ drain ball valves at deep-drawn discharge point
Separator - Efficiency separator, type A, made of staggered stainless steel half-shells
stainless steel half shells 1.430 - Dimensions: 500 x 400 x 25 mm; number adjusted to air volume
- Balancing plates in stainless steel 14.301 for filling unused separator area in the separator row
Lighting
- Standard lights in LED, 1-lamp, protection class IP54
- Flush-mounted in bonnet, with Sekurit glass cover
Installation Wartung
Zusätzliche Infos
- Sufficiently temp. supply air is fed directly to the separators.
- An amount of 20 % must not be exceeded in this case
- Exception according to VDI 2052 (“special case”) possible
- Insulation of the pressure chambers with synthetic non-flammable foams
foams, according to DIN EN 16282