
CB maxi
Control cabinet for 3 groups with display unit
Technische Merkmale
This control box has a display unit and is used to control UV/ozone (CKA) modules.
Vorteile
This control box has a display unit and is used to control UV/ozone (CKA) modules.
Einsatz
- For the control of UV/ozone (CKA) modules, activation, counting of operating hours and control of the proper functioning of all components of the exhaust air purification system.
Funktion
- Switching on and off via main switch. 3 individual ventilation sections can be switched on and off separately.
- Signal of faults (pressure drop in the fan, lamp current fallen short of) as a collective fault via a corresponding LED in the operating unit and in the display in the selected field. Additionally as collective fault to the GLT
- Control of 3 hood areas or fields with lamp power up to approx. 1800 watts each.
Technologie Material
- The device has a modular design
- Control unit (CB maxi) in plastic housing (IP 65)
- Display unit (DP Wall)
Installation Wartung
- Wall mounting in plastic housing (DP wall) intended for mounting in false ceiling
Zusätzliche Infos
- Three individual ventilation sections can be controlled individually
- An existing fault, e.g. filter open, pressure drop in the fan, lamp current undershot (the lamp current is constantly monitored, separately for each field, by an integrated current measurement on the electronic unit) is signaled as a collective fault message via a corresponding LED in the operating unit and shown in the display for the selected field and issued to the BMS as a collective fault.