Skip to main content



Many customer problems are individual, many are also repetitive. Take advantage of our many years of experience with countless customer issues of various pollutant problems and cleaning technologies as well as regulatory compliance. Let us advise you how your issue can be solved effectively and cost-saving.

Hygiene Check

Hygienic room air check in the production room

With a room air check, we analyze the air-hygienic conditions in the production room in order to find possible sources of error or starting points for an even safer production of food products. Our measurement is not a substitute for a certified measurement that may be ordered by the authorities, but it is at least as informative.

The following procedure is included in the check:

  • Analysis meeting with responsible persons
  • Inspection of the production rooms
  • Determination of the measuring points for the germ count measurement
  • Germ count measurement approx. 10 measuring points with Air Sampler
  • Evaluation of the germ count measurement (after approx. 1 week)
  • Report with suggestions for measures
  • Discussion of the results


oxytec offers its products and equipment for purchase and leasing. Talk to us if you are interested in this.

Operation and maintenance

We offer our customers to maintain the systems for them on a regular basis and thus ensure their operation. In principle, however, our systems are designed in such a way that the customers can manage them on their own.

Accessories and spare parts

Spare parts for plasma devices

Many of the older and partly also the newer plasma units from other manufacturers (“foreign makes”) do not have a short-circuit protection. Therefore, the equipment can cause scorched plasma plates. This danger also exists if effective pre-filtering is missing and the plasma plates become greasy. This also promotes the development of “scorching damage”. 

oxytec helps:

It is often no longer possible to retrofit additional pre-filtering or short-circuit protection. However, we can supply replacements for the damaged plasma plates. We are also at your disposal for an inspection. Please ask for an appropriate offer. Maintain the effectiveness of your plasma unit. We help you.

Repair instead of total failure

Due to incorrect design, lack of maintenance or poor quality (non-resistant material), UV and plasma equipment can fail. Especially susceptible are e.g. makes without short-circuit monitoring of the plasma electrodes.

Spare parts for UV systems

UV tubes and ballasts are available for every make / device – please contact us. We are also happy to offer maintenance.

Do you have any questions or
would like a quotation?

Please contact us: