Skip to main content

Safe process water – germ-free with UV-C technology

oxytec systems for effective disinfection of drinking water – without chemicals, without residues

Drinking water is a hygiene-critical resource in both production and buildings. Even with regularly tested supplies, germs, bacteria, and viruses can multiply in pipes, tanks, or taps – especially in stagnant water, warm temperatures, or backflows. This can lead to hygiene problems, system contamination, or health hazards.

With oxytec’s certified UV-C systems, drinking water becomes 99.999% germ-free – without chemicals, taste changes, or environmental impact. The technology is durable, low-maintenance, and safe for use in flow-through operation.

What would you like to know?

Simply put your question to our AI. They will answer you individually:

Typical sources of contamination in the process water system

Source Potential for pollution Special features
Tanks and storage facilities Biofilm, standing water, heat Particularly critical in stagnant or multi-chamber systems
Pipes / return lines Bacteria, deposits, cross-contamination Areas that are difficult to access for hygiene purposes
Return flows from systems Process residues, product contact, aerosol germs Hygienic weak point with open routing
Circulation systems/buffers Temperature changes, pH fluctuations, microbial niches Formation of biofilm or spore populations

Why process water must be sterile

Open or semi-protected processes make water a carrier of germs

Biofilm or microbial contamination can contaminate production lines

Cleaning is often insufficient, especially in dead zones in pipes

IFS, BRC, and FSSC 22000 require microbiologically controlled water

Hygiene vulnerabilities in the water system are considered a high CCP risk

Legal requirements and hygiene standards

  • IFS Food, BRC, FSSC 22000: Water as a hygiene-relevant medium
  • Drinking Water Ordinance + Process Water Guidelines of the State Authorities
  • HACCP / oPRP / CCP documentation for water in contact with products
  • DIN EN 1672-2 / ISO 14159: Hygiene requirements for water-carrying systems

Oxytec supplies validatable, auditable systems with documentation and germ testing.

Get advice now – for hygienically safe process water

Would you like to guarantee microbiological safety in your process water system—without the hassle of chlorine, steam, or chemicals?

Contact us—we will plan your UV-C solution for germ-free production water.

Directly in process tanks, intermediate containers, or retention basins

Effective against biofilm, yeast, pseudomonads, mold spores

Ideal for water with low circulation or fluctuating levels

Optional automatic operation monitoring and temperature monitoring

TST

Connection to PLC / BMS / hygiene management systems

Optional with runtime monitoring, status display, alarm functions

Can be combined with filtration, softening, or backflow prevention

Typical areas of application

Dairies, fresh meat and convenience food production

Beverage industry (mixing water, brewing water, process water)

Salad, delicatessen, and vegetarian food companies

Cooling water circuits for conveyor belts and screw conveyors

Washing water in packaging areas, hygiene locks, or machines

Your advantages with Oxytec UV-C systems for process water

Germ reduction of up to 99.999% without chemicals

Suitable for recirculating, mixed, and tank water

Residue-free, tasteless, and environmentally friendly

Low maintenance and energy-efficient in continuous operation

Certifiable under IFS / HACCP / FSSC

Safe operation even with complex system structures

FAQ – Frequently Asked Questions

Which germs are reduced by UV-C in process water?

Oxytec systems reliably inactivate:

  • Bacteria (e.g., Pseudomonas, Listeria, E. coli, enterococci)
  • Viruses (e.g., noroviruses, adenoviruses)
  • Yeasts and mold spores
  • Biofilm formers in stagnant water systems or recirculation systems

Typical log-level reductions are 3–5, i.e., up to 99.999% germ reduction.

Where is UV-C technology installed in the water system?

Depending on the intended use, the following are available:

  • Inline flow reactors in pipes or supply lines
  • UV-C immersion lamps for tank sterilization
  • Installation in return lines, loops, or bypass sections

Retrofitting is also possible for existing systems, often without major modifications.

How does disinfection without chemicals work?

UV-C light (254 nm) destroys the genetic material of microorganisms.

The process is physical, without chemical reactions or residues.

No impact on the taste, conductivity, or pH value of the water.

No risk of over- or under-dosing, as with chemical treatment.

Is the technology suitable for recirculating water and mixing systems?

Yes – UV-C can also:

  • Keep circulation systems with variable use germ-free
  • Treat returns in CIP-compatible systems or open circuits
  • be used as buffer protection in mixed water applications (e.g., brewing water, washing water)

UV-C is the first choice, especially in cases of temperature fluctuations or stagnation.

How is the effectiveness of UV-C disinfection proven?

Oxytec provides the following upon request:

  • Validation protocols and germ detection
  • Support with oPRP or CCP documentation in the HACCP system
  • Information on log reduction for specific germs
  • Interfaces to GLT and audit software, e.g., operating hours counter, status display

How often do the UV-C components need to be serviced?

The systems are low-maintenance:

  • Lamp life: 8,000–10,000 hours
  • Annual replacement recommended
  • Optional automatic runtime monitoring and warning system
  • Cleaning of the quartz protective cover at intervals of 2–4 months, depending on water quality

Can the system be combined with filters or water softeners?

Yes – UV-C systems can be easily integrated into:

  • Filter sections (e.g., activated carbon, sediment filters)
  • Water softeners or reverse osmosis systems
  • Process tanks, cooling water circuits, CIP pre-treatment zones
  • The systems are compact and can be configured flexibly, even in limited spaces.

What standards and regulations does the system comply with?

oxytec systems comply with:

  • the requirements of IFS, BRC, FSSC 22000
  • the technical guidelines of DIN EN 1672-2 and ISO 14159
  • the regulations on process water hygiene issued by state authorities
  • Requirements for validity, traceability, and audit compliance

For which production areas is UV-C process water disinfection particularly suitable?

Typical areas of application:

  • Dairy and cheese production (CIP, cooling, mixing)
  • Meat and sausage processing (washing and conveyor water)
  • Beverage industry (brewing water, rinsing processes, cooling circuits)
  • Delicatessen, salad, and convenience food (washing water, spray water)
  • Packaging hygiene in fresh food areas